Get complete information related to latest Truck Repair Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Truck Repair Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Truck Repair Tenders.
Tender For tender engineering section(only oem & authorized dealer - fabrication & modification work during the season and off season. machinery repairing work of cane carrier, fibrizar, rotory filter, all mills, bagasse carrier, return bagasse carrier, boiler accessories, all boiling house machinery, molasses storage tank and etp to be done. machinery shut down work to be attended on top priority, maintenance work of cseb power plant is also required to be attendes. terms and conditions:- 1. service provider should have sugar industry exprienced personal team of highly skilled(1no.), skilled (2nos.), semi skilled (2nos.), khalashi (2nos.), un-skilled (2nos.) with one technical supervisor. 2. boarding will be provided by factory at factory site. 3. lodging will by arranged by the contractor. 4. contractor will be full responsible for safety of their emplotees and shall take in all steps required under the factor act or other wise as per direction given technical staff of factory. 5. contractor will be registered under gst. 6. minimum 5 year experience in same job. 7. submit your offer with details of technical team on per month basis for a minimum period of 1 year & no extension will be consider.
Tender For bid to ras providing of repair and overhauling service - built up trucks; repair of specialist vehicles against 14; no; buyer premises, service provider premises
Tender For bid to ras providing of repair and overhauling service - built up trucks; repair of specialist vehicle against 13; no; buyer premises, service provider premises
Tender For corrigendum : supply of chain and chain spares - csm bhogpur, bagasse elevator chain & its spares, chain with case hardened, m.s roller, bush and pins for baggase elevator chain having attachment link at every 4th link., pitch 150 mm, side link as per drg. no.ce/mh/504 with test certificate from approved lab, bush as per drg no. ce/mh/504, roller as per drg no. ce/mh/504, pin as per drg.no ce/mh/504, outer link pin cut type as per drg.no. ce/mh/504, outer link pin size hole as per drg.no. ce/mh/504, inner link bush type (both sides) as per drg.no. ce/mh/504, side attachment link as per drg.no. ce/mh/504, cane carrier chain & its spares, cane carrier chain pitch -150mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no.mh pcc r1, pin as per drawing no. . mh pcc r1, bush as per drawing no. . mh pcc r1, roller as per drawing no. . mh pcc r1, outer link r.h as per drawing no. mh pcc r1, outer link l.h as per drawing no. mh pcc r1, inner link r.h & l.h as per drawing no. mh pcc r1, cane carrier slates as per drg no. mh-517, inter-rack carrier chain& its spares, inter rack carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, secondary carrier chain & its spares, secondary carrier chain pitch -229mm complete with pin ,bush and rollers case hardening and assembled with test certificate from approved lab as per drg.no. ce/mh/503, bush as per drg. no. ce/mh/503, pin as per drg no. ce/mh/503, inner link l.h & r.h as per drg.no. ce/mh/503, outer link l.h without attachment as per drg.no. ce/mh/503, side attachment link (outer link l.h) as per drg.no. ce/mh/503, csm nawanshahr, supply of secondary carrier chain spares as per drg. no. 183 r3material of side link en 45pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5 hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 60 ton, supply of cane carrier chain and spares as per drg. no. 216 r3material of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller is- 226- 1975hardness = pin 50 5hrc bush 40 5 hrc roller 30 5 hrcbreaking load = 40 ton, side link (fig no. 1), side link (fig no. 2), side link (fig. no. 3), roller (fig no. 4), pin (fig no. 5), bush (fig no. 6), slats (fig no. m- 316r), supply of rbc chains as per drg. no. m- 263rmaterial of side link 55c8/is 1875:1978pin & bush 16ni3cr2/isi57 part 4/1988roller - is 226-1975hardness = pin 50 + 5 hrc bush 40 + 5 hrc roller 30 + 5 hrcbreaking load = 60 tonsupply of spares for r.b.c. chain as per drg. no. m-263 r1, side link for bush (fig no. 1), side link (round hole) ( fig no. 2), side link (one side cut hole) (fig no. 3), side link for attachment ( fig no. 3 a), attachment no. m 111r2, roller (fig no. 4), bush (fig no. 5), pin (fig no. 6), rake (grill type) as per drg. m-111r3, pin for rake as per drg m-111r4, supply of forged link chain 229 mm pitch as per drg. no. m-305specification:material of forged block - en 30 bmaterial of pin & bush - 16ni3cr2pin hardness - 50 5hrcbush hardness - 40 5hrcbreaking load - 70 ton, csm batala, pin for rbc as per drawing no. bcsm/mh/01, bush for rbc as per drawing no. bcsm/mh/01, roller for rbc as per drawing no. bcsm/mh/01, pin for mbc as per drawing no. bcsm/mh/01, bush for mbc as per drawing no. bcsm/mh/01, roller for mbc as per drawing no. bcsm/mh/01, pin for elevator as per drawing no. bcsm/mh/01, bush for elevator as per drawing no. bcsm/mh/01, roller for elevator as per drawing no. bcsm/mh/01, pin for cane carrier as per drawing no. bcsm/mh/01, bush for cane carrier as per drawing no. bcsm/mh/01, roller for cane carrie
Tender For tender for remove the worn out runners from the main bagasse carrier bagasse elevator and return bagasse carrier errect 8x65 10x50 mm flat iron bars in their place clean the welded areas using a grinder , cut and remove the worn out bottom plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect new 6 8 10 mm , cut and remove the worn out side plates of the main bagasse carrier bagasse elevator and return bagasse carrier errect 6 8 10 mm plates satisfactory trial run , cut out and remove the damaged and weak sections of the main bagasse carrier fabricate and errect a new assembly including the gear shaft system using the supplied plate , cut out and remove the weak and corroded sections of the bagasse feeding chutes errected boilers fabricate and replacements using the provided plates and repair the associated shafts and gears , the casings of the boiler id and fd fans have become severely weakened and damaged the task involves cutting away and removing the weakened sections fabricating , cut and remove the deteriorated side bottom and top plates surrounding the air heater of boiler no. 3 fabricate and errect new plates using the specified 6 8 mm plate in their original positions , fully strengthen the air heater plates and conduct a satisfactory trial. , dismantling the old air heater tubes of boiler no. 01 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 02 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , dismantling the old air heater tubes of boiler no. 03 size 63.5 mm od x 2.64 mm thickness fabricating and errecting new tubes in accordance with the drawing , a. dismantling old columns beam channels etc. b. manufacturing and installing new columns beam channels , installing 16 inch 18 inch manholes with blinds , constructing a bed for the pump fitting the pump and motor and conducting a trial run of up to twenty hp , dismantling fabricating and erecting weak corroded pipe lines up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded tees up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting weak corroded nipples up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated cross member up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated band up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak throated flange up to 12 and providing satisfactory leak proof trials. , dismantling fabricating and erecting a weak sloping reducer up to 12 and providing a satisfactory leak proof trial. , removing the old corroded platform and replacing it with a new one
Tender For providing of custom bid for services - removal of sugarcane fallen from the cane carrier and placing it back onto the carrier chain similarly collection of bagasse fallen from the rake carrier and feeding it back into the chain along with cleaning of the surround..